The 4.2MPa Pipeline FM200 Gas Fire Suppression System is one of the cleanest ways to stop a fire inside equipment rooms, cable galleries and archives: the agent reaches extinguishing concentration in seconds and evaporates without residue. This reference hub explains how a complete FM200 Gas Fire Suppression System is engineered, where each architecture should be specified, and which decisions protect uptime and high-value assets. Use the comparison below to brief a fire suppression system manufacturer, and to check what a FM200 fire suppression system supplier documents on agent concentration, discharge time and residue-free clean-up.

Explore the Pipeline System Request a Project Quote

Computer roomsPower distribution roomsCommunication roomsArchivesGenerator rooms

4.2MPa Pipeline FM200 gas fire suppression system,Guangdong Zhenxinglian Fire Protection Equipment Co., Ltd.,4.2MPa Pipeline FM200 gas fire suppression system

FM200 clean agent storage cylinders in a ZHENXING high-pressure arrangement

Clean-agent chemistry

What Is FM200? A Clean Agent That Leaves Nothing Behind

FM200 is a common name for HFC-227ea, a clean agent stored as a pressurised liquid and released into a protected zone as a gas. Because it discharges as a gas and then vaporises completely in the atmosphere, it extinguishes fire without the cleanup, corrosion concerns or water damage associated with sprinkler systems.

ZHENXING rates its pipeline architecture for total-flooding applications covering electrical fires, liquid fires, fires in fusible solids and surface fires, plus gas fires where the fuel supply is shut off first. For data centers, control rooms and financial record storage, the result is a faster return to normal operation and minimal business downtime.

✓No residue left after discharge

✓Electrically non-conductive gas phase

✓Vaporises completely in the atmosphere

✓Fast suppression in under 10 seconds

Pipeline module technical profile

Storage pressure @20°C 4.2 MPa Built-in pressure for calibrated high-pressure storage.

Max operating pressure @20°C 5.6 MPa Built-in pressure ceiling for the container assembly.

Fire extinguishing agent amount ≤950 kg/m³ Configured against protected volume and hazard class.

Time for extinguishing agent ≤10 s Engineered fast response to limit damage and downtime.

Operating temperature range 0°C ~ +50°C Suitable for indoor technical and industrial spaces.

Starting method 3 activation modes Automatic start, electrical start, mechanical emergency start.

Design note: agent amount, nozzle layout and pipe sizing are project-specific. Send room volume and hazard details for a ZHENXING project quotation.

Operation sequence

How a ZHENXING Pipeline FM200 System Works

01Store — pressurised liquid agent

HFC-227ea is held in high-pressure containers at 4.2 MPa built-in pressure at 20°C. The module stays operationally ready across a 0°C to +50°C temperature band.

02Initiate — three independent start modes

Detection logic starts the system automatically, an operator can trigger an electrical start from a manual release point, and a mechanical emergency start remains available if normal power is lost.

03Discharge — total flooding in ≤10 seconds

The modular pipeline distributes the agent into the protected room, with extinguishing agent quantity configured up to 950 kg/m³ and release time held under 10 seconds.

04Protect — gas-phase suppression, no residue

Because the agent vaporises completely and offers good gas-phase electrical insulation, sensitive electronics can continue operating without the secondary damage typical of water-based suppression.

Buyer decision point: the 4.2MPa pipeline format suits total-flooding zones where one central agent supply must protect several rooms through a piped network.

Scenario-to-specification

Which Rooms Need FM200 Protection?

Each use-case below links a real facility risk to a published system fact and a concrete buyer decision.

Scenario 01

Data centers & computer rooms

Live servers cannot tolerate water, powder residue or extended downtime after an incident.

System fact: residue-free gas discharge, ≤10 s delivery, gas-phase electrical insulation.

Specify total flooding for zone volume →

Scenario 02

Communication equipment rooms

Switching, broadcasting and exchange rooms hold dense electronics in continuous operation.

System fact: modular pipeline layout creates flexible routing around equipment banks.

Plan pipe routing with engineering →

Scenario 03

Power distribution & generator rooms

High-voltage panels and generator sets involve electrical and flammable-liquid fire risk.

System fact: listed for electrical fires and liquid fires; non-conductive agent gas phase.

Check pipeline discharge parameters →

Scenario 04

Archives, libraries & vaults

Paper records, microfilm and valuables are destroyed by water as quickly as by fire.

System fact: agent vaporises completely in the atmosphere, leaving surfaces dry.

Request dry-system specification →

Scenario 05

Oil depots & chemical warehouses

Flammable liquids and fusible solids need a total-flooding agent that reaches all fire surfaces.

System fact: extinguishing agent amount configurable up to 950 kg/m³ for dense hazards.

Send hazard data for agent calc →

Scenario 06

Precision instrument rooms

Metrology, medical imaging and laboratory equipment demand clean, low-damage extinguishing.

System fact: no residue and no conductive wetting protect calibrated surfaces.

Review clean-agent release modes →

Need a project-specific configuration?
ZHENXING sizes containers, agent quantity and piped distribution from real room data. Send floor plans and hazard class for a formal project quote.

Project & bulk enquiries

Get a Project-Specific FM200 Configuration

Tell ZHENXING your protected room volumes, hazard class and preferred system architecture. You will receive agent quantity calculations, container sizing and a clear project quotation before you purchase.

Review Pipeline Product Page